Cost-Effective Repair of a Damaged Bush from Material 1.4460 Using Laser Cladding
Initial Situation: Damaged Bush – Replacement or Repair?
A bush (also referred to as a “liner”) made from duplex stainless steel 1.4460 showed severe damage. Instead of ordering an expensive new component, the customer opted for a high‑quality, economical repair using our laser cladding process.
Solution: Precise Refurbishment with STELLITE™ 21
- Preparation: The damaged areas were machined down to create a clean, uniform base for the rebuild.
- Laser cladding: The bush was then rebuilt using STELLITE™ 21, a cobalt‑based alloy renowned for its excellent wear and corrosion resistance.
- Post‑machining: The surface was mechanically processed to restore the required smoothness and dimensional accuracy. The customer subsequently carried out finish turning and grinding to achieve the final surface quality.
Benefits at a Glance
- Cost savings: Up to 40–50% lower cost compared with a new component – with equivalent quality and service life.
- Fast turnaround: Repair completed in a short time, avoiding long lead times for replacement parts.
- Highest standards: The process meets the requirements of classification societies and produces a pore‑free, high‑strength surface with hardness up to 56 HRC.
Visual Documentation: From Damage to Finished Solution
Condition | Description |
On delivery | In the 4‑image overview, the top‑left photo shows the bush with damaged sections (pre‑machined by the customer). |
Laser cladding | The top‑right and bottom‑left photos show the same bush after cladding with STELLITE™ 21 – a uniform build‑up for maximum durability. |
Coating completed | The bottom‑right image shows the bush ready for dispatch, prepared for final machining at the customer’s site. |
Final result | After turning and grinding, the bush is as good as new, with optimised surface finish and fit. |
(Note: The photos shown are from projects involving shaft‑seal bushes made from 1.4460 / 1.4462.)
Conclusion: Repair Instead of Replacement – Smart, Fast, Sustainable
Using laser cladding, highly stressed components such as bushes or shaft seals can be refurbished cost‑effectively, without compromising on quality or service life. It is a smart alternative to new manufacture, proven in marine applications and plant engineering alike.
Do you have similar components that need repair?
We will be pleased to advise you on bespoke refurbishment solutions.
Ship shaft seal prior to delivery, ready for final machining at the customer’s site.

