Sootblower systems are, in many plants, a “forgotten component group” – they only attract attention once serious damage has already occurred.
In the photo you can see that, instead of a proper lance head, a simple sheet-metal cap has been welded to the end of the lance. When cold condensate impacts the inside of this cap – which has been heated by flue gas – during blowing, thermal shock occurs. Over time, these thermal shock cycles can cause the cap to detach from the lance, rendering the entire lance unusable.
In addition, there is severe corrosion and wall thinning at the front section of the lance. Due to the high temperatures and the aggressive constituents of the flue gas, the service life of these tubes is often significantly limited.
By applying an INCONEL™ or HASTELLOY™ alloy onto the lance surface using the laser cladding process, in combination with a suitable lance head design, the service life of sootblower lances in waste‑to‑energy and other boiler plants can be dramatically increased – contributing to high overall plant availability.
Of course, we can also apply a laser‑cladded protective coating to lances that are already in stock, upgrading and safeguarding them before installation.

