
High-Speed Laser Cladding
High-Speed Laser Cladding Fast, Precise and Cost-Effective Protection for Superheater Tubes High‑speed laser cladding, with process speeds in excess of 25 m/min and a typical coating thickness of only 0.25

High-Speed Laser Cladding Fast, Precise and Cost-Effective Protection for Superheater Tubes High‑speed laser cladding, with process speeds in excess of 25 m/min and a typical coating thickness of only 0.25

KIMETRO – Fast, Precise, Efficient What began as a strategic discussion within the key‑account initiative of Duisburg Business & Innovation GmbH (DBI) has evolved into a flagship project showcasing successful

In the cement industry, cooling coils and tube bundles are exposed to extremely high levels of abrasion. Without additional protection, this significantly shortens their service life – making regular manufacturing

The challenge: Extreme exposure to flue gas and dust In the metallurgical industry, flue gas elbows are exposed to extreme conditions. High flue gas velocities and aggressive dust loads cause

Sootblower Tubes with Laser Cladding: Why Coating After Nozzle Welding Makes All the Difference https://haeuser-co.energy/wp-content/uploads/2026/01/2M9A0541_2_1.mp4 The Issue: Conventional Coatings – Risks and Limitations Sootblower tubes in power plants and industrial

The plasma spraying process used here enables full protection of the flat coil assembly, including bends, suspension elements, spacer bars and other exposed areas. The most interesting feature, however, is

Wall and roof penetrations are known weak points in boiler systems: the penetration tubes are exposed to different gas flow patterns and increased loads, wear out within a short time

This project involved on‑site coating of a shell‑and‑tube heat exchanger in a hazardous‑waste incineration plant treating hospital waste. Due to very high flue‑gas temperatures and heavy dust loading, the weld

Corrosion induced by chlorine and sulphur, in combination with high‑temperature corrosion mechanisms and abrasion/erosion, significantly reduces the service life of boiler walls. This is particularly evident in boiler plants in

Laser‑cladded membrane walls in the combustion chamber of a waste‑wood‑fired boiler have now been in operation for around 55,000 operating hours – equivalent to 7 years. The INCONEL™ 625 layer